D2 PRO – Snowfoam HF20

From £83.70

Snowfoam HF20 is a sophisticated traffic film remover which produces a rich foam designed to effortlessly lift dirt, grime and road contaminants. Snowfoam HF20 is suitable for cleaning vehicles of all types leaving a professional finish.

This high foaming TFR is the perfect combination of performance and efficiency providing a deep clean for vehicles whilst reducing the need for strenuous manual labour.

When used with suitable foaming equipment, Snowfoam HF20 delivers outstanding results and saves time.

Pack size/Volume

Mainland UK Shipping Only. Please see our Terms of Service

Features & Applications

  • Produces a rich foam designed to effortlessly remove dirt from vehicles

  • Can be used with suitable foaming equipment

  • Long lasting foam cling means detergent stays in place

  • Pre-wash vehicle with cold water to remove heavy debris

  • Application should be started at the bottom of vehicle. Agitate product with brush.

Datasheets

  • Snowfoam HF20 - Technical Data Sheet240kb

  • Snowfoam HF20 - Safety Data Sheet240kb

FAQs

What is Traffic Film?

Traffic film is the accumulated film made up of road dirt, diesel, oil, soot/smoke, salt, oils, proteins from blood and faeces and other foreign contaminants that a vehicle picks up as it drives down the road.

How does Traffic Film Remover work?

Traffic Film Remover uses a combination of surfactants and solvents to break down the traffic film and lift it away from the vehicles surface.

Can Snowfoam HF20 be used on all vehicle surfaces?

Yes, Snowfoam HF20 is generally safe for most vehicles however it always recommended to check individual products technical data sheets for guidance.

How do I dilute Snowfoam HF20?

For recommended dilution see Snowfoam HF20 Data Sheet.

How do I apply Snowfoam HF20?

You an apply Snowfoam HF20 using:

  • A pressure washer with a chemical injector
  • A foam lance for a thicker, clinging foam
  • A spray bottle for targeted cleaning
  • A bucket and brush for manual scrubbing

Pre-wash vehicle with cold water to remove any heavy debris. Do not apply to hot bodywork – always soak the vehicle to cool the surfaces in hot weather with clean water.

Apply to vehicle using the recommended dilution (see Technical Data Sheet). Start application at the bottom of the vehicle & work up. Agitate product with vehicle brush.

Rinse thoroughly after use with clean water.

Do you want to find out more about us and what we do?
Ask a Question or Request a Quote

Enquiry Type*

Type of enquiry: