ETW Traffic film remover is designed for use where frequent washing of vehicles is needed and cost is a major factor. A good combination of performance & economy are achieved using synergistic blends of materials to achieve good cleaning.
This solution should be diluted prior to application to vehicles. Dilute ETW Traffic film remover to suit conditions & severity of soiling. A minimum starting point would be 10:1 with water up to 60:1. ETW Traffic film remover can be applied through pressure sprayers, high pressure washers or a mop & bucket.
It can be used with either hot or cold water & always rinse of thoroughly after use. Do not apply to hot bodywork, always cool vehicle bodywork with cold water in hot weather prior to applying traffic film remover.
Designed for use where frequent washing of vehicles is needed & cost savings are a major factor
Can be applied using hot or cold water & through the use of pressure sprayers, high pressure washers or a mop & bucket
This solution should be diluted prior to application to vehicles; from 10:1 up to 60:1 depending on severity of soiling
Do not apply to hot bodywork, always cool vehicle bodywork with cold water in hot weather prior to applying
ETW Traffic Film Remover - Technical Data Sheet240kb
